2020 Best Used Tires Pyrolysis Production Line to Fuel Oil
Introduction of Used Tires Pyrolysis Production Line to Fuel Oil:
1. Used Tires Pyrolysis Production Line to Fuel Oil:
a. Using waste tyre/rubber and other raw material to process raw materials, the use of new heating technology to break up the recogranization of rubber molecules.
b. Get fuel oil. Equipped with super large heat exchange area tube condensing device,it can effectively improve cooling efficency and production of Used Tires Pyrolysis Production Line.
c. Rate of output. Full stystem closed design ensures safety, environmental protection and economy.
d. Large vehicle tyres 45%(less steel wire, less oil)-small tyres and westbound tyres about35%.
-rubber cable skin, sole 35% or so mixed sole 30% or so sneakers 20-30% or so.
-waste chemical fiber carpet: more than 30-PMMA (plexiglass) 40%.
e. Miscellaneous rubber: about 35% -tyres: steel wire, rubber,carbon black, cracking speed slightly faster.
2. Universal plastic/ general Plastic:
a. polyvinyl chloride PVC, polyethylene: PE(such as film, bottle, electrical insulating material,
handbag,water pipe, oil drum, beverage bottle/calcium bottle, daily necessities, etc.) the pure oil yield is about 95%.
Polypropylene: PP (such as film, plastic rope , food utensils, pots, barrels, furniture, woven bags, caps,automobile) to insurance the pure oil production rate of Used Tires Pyrolysis Production Line is about 90%.
Polystyreene: PS (such as electrical appliances, stationery, cups,food containers, housedhold electrical appliances, electrical accessories, foam products, toys and so on) the pure oil production rate is about 90%, ABS engineering Plastics: about 40% ,pure white plastic cloth: about 70%.
3.Oil sludge-- Oil sludge to get crude oil, slag and gas.
Process of Used Tires Pyrolysis Production Line to Fuel Oil:
Outputs of Used Tires Pyrolysis Production Line:
Usage of outputs products from Used Tires Pyrolysis Production Line:
NO. | Name | Usage |
1 | oil | • can be sold directly. • Reprocessed into diesel and gasoline by use oil distillation machine. • can be used as fuel. |
2 | Carbon black | • can be sold directly. • Reprocessed into high quality carbon by the carbon black grinding equipment. • make carbon brick by briquetting equipment. |
3 | Steel wire | • can be sold directly. • make steel bloom by hydraulic press-packing |
4 | Combustible gas | • can be as fuel heating the reactor |
OUR CUSTOMERS OF Used Tires Pyrolysis Production Line:
FAQ:
Q1: What kind of raw material can be used for Used Tires Pyrolysis Production Line?
waste tyres/ rubbers/ shoe soles/ inner tube / cable husk/ bicycle tyre/ motorcycle tyre; PP,PE,PVC,PMMA plastic, paper mixture from paper mills and all kinds of waste nylon products
Q2: What are the end products?
If your raw material is tyres, end products are fuel oil, carbon black,steel wire and waste gas; if your raw material is rubber or
plastics, then end products are fuel oil, carbon black and waste gas
Q3: What's the fuel of Used Tires Pyrolysis Production Line?
The fuel can be coal, charcoal, firewood, fuel oil, heavy oil and natural gas
Q4: What's the covering area of one set of 5-10 ton capacity Used Tires Pyrolysis Production Line?
The equipment covers 30 square meters(length20m*width15m). Besides raw material and end products storage areas,you also need to prepare workers' resting room and simple office, so totally 600-800 square meters land will be better
Q5: How many workers needed to operate the Tires Pyrolysis Production Line?
3-4 workers are enough for one set of pyrolysis plant. If you use auto-feeder and auto-discharging system, then 2 workers are ok
Gain profits fast!
Do not hesitate to contact us for Used Tires Pyrolysis Production Line!
Jenny Guo
Whatsapp/wechat: +86-15836160815
24hrs online service here!