Copper Sulfate Pentahydrate Manufacturing Process
How to make copper sulfate from copper and sulfuric acid?
Copper sulfate pentahydrate manufacturing process is new technology to recycling scraps copper into high value copper sulfate.
Copper sulphate or cupric sulphate (CuSO 4) is a salt of copper which exists in varying amounts of hydration.Most commonly, it is found as bright blue or green coloured crystals, called pentahydrate (CuSO 4.5H 2 O). Copper sulphate has wide range of applications and has been used since ages for manufacturing a variety of products ranging from fungicides to paints.
Introduction of Copper sulfate pentahydrate manufacturing process
1. Dissolve copper process
Soluble copper liquid from Copper sulfate pentahydrate manufacturing process the mother liquor before preparation of sulfuric acid, water, and soluble copper in micro bubble dissolved copper kettle, soluble copper temperature around 85-90 ℃. Liquid after dissolved copper (copper about 180 g/L, the proportion of 1.38 to 1.42) into the settler.
2. Sedimentation process
In the copper sulfate pentahydrate manufacturing process, microbubble faintly soluble copper kettle self-provided float drainage component and swirl solid-liquid separation, sedimentation process of setting up the settler a further separation and water separation of content into the liquid pool, after impurities removal solution into the mother liquid pool.
3. Crystallization process
After settling copper sulfate pentahydrate manufacturing process of cleaning solution in the crystallization process. cold water is provided by the cooling tower system, used in cooling water circulation. After the crystallization process of copper sulphate product in 1-4 mm particles precipitate from the solution, and mother liquor back in mother liquid pool.
4. Washing drying processes
Crystal slurry by the thick bottom valve in a centrifugal filter, the liquid - water washing off - weighing & packaging after dry.
Matters need attention for Copper sulfate pentahydrate manufacturing process
1. Workers must wear flat lens,acid-resistant clothing and gloves as well as rubber shoes, masks during operating the Copper sulfate pentahydrate manufacturing process.
2. Non-staff are not allowed to enter the production workshop.
3. Workers must first carry out safety training before taking up their posts.
24hrs Online Service! Welcome to contact us for Soluble Copper Kettle Equipment!
Jenny Guo: +86-15836160815 (Whatsapp & Wechat)