Used Oil Burner For Furnace

1. Feature:energy saving.
2. Applicatioins: in boilers, asphalt mixing plants,hot air furnaces,industrial kilns and other thermal mechanical equipment.
3. Fuel source: multipel oil.
4. Delivery time: 3 to 5 days after receive the payment.
Chat Now

Product Details

China No.1 Sale Used Oil Burner for Furnace Waste Engine Oil Boiler Burners

Used Oil Burner for Furnace

Used Oil Burner for Furnace:

The used oil burner of waste incinerator is a device that will spray oil and air into the incinerator in a certain proportion, at a certain speed and in a certain mixing mode to provide the heat needed for the start-up/shutdown of the incinerator and the auxiliary heat needed when the calorific value of waste is lower than the designed calorific value.The function of burner is: start ignition and stop the furnace to control the furnace temperature reduction rate;Auxiliary combustion when the calorific value of garbage is too low to reach the specified furnace temperature; Drying after building new furnace and repairing furnace wall refractory.

When the calorific value of waste is lower than 8500KJ/kg, the combustion air needs to be heated.When the calorific value of waste is lower than 7500KJ/kg, an auxiliary burner is usually installed to meet the requirements of no less than 2S and slag heat reduction when the furnace temperature reaches 850℃.When the waste calorific value is greater than 8500KJ/kg, the auxiliary burner may not be set, and only the temporary ignition burner is set.

The used oil burner is mainly composed of an oil atomizer and an air regulator.The fuel is atomized into fine oil particles through the atomizer, which is sprayed into the furnace at a certain atomization Angle and mixed with the air flow with a certain shape and velocity distribution through the air regulator.Now more use of compressed air, steam or mechanical centrifugal force atomization.The combination of the oil atomizer and the air regulator shall enable most of the air needed for combustion to be fed in from the torch roots in a timely manner, and the air distribution throughout the torch shall be adapted to the flow density distribution of the oil mist.A certain amount of air will also be supplied to the rear of the torch to keep the black carbon and the coke particles burning.

Used Oil Burner for Furnace

Used Oil Burner for Furnace

Technical Parameters:


Item No.

Power (KW)

Oil Consumption
(Kg/h)

Nozzle Qty

Motor

Power Supply

RT120

12-50

1-4

1

90W

230V/50Hz

RT120-1P

12-50

1-4

1

130W

230V/50Hz

RT133-1

40-80

3-7

1

130W

230V/50Hz

RT133-2

70-115

6-10

2

130W

230V/50Hz

RT133-1P

40-80

3-7

1

220W

230V/50Hz

RT133-2P

70-115

6-10

2

220W

230V/50Hz

RT146-2

70-139

6-12

2

150W

230V/50Hz

RT146-3

115-200

10-18

3

180W

230V/50Hz

RT146-2P

70-139

6-12

2

250W

230V/50Hz

RT26

116-400

10-35

4

180W

230V/50Hz

RT40T

275-650

37-55

6

370W

380V/50Hz

RT120T

650-1750

70-150

8

370W

380V/50Hz


Features of used oil burner for furnace:

1Various fuels are applicable, e.g. used engine oil, used vegetable oil, used crankcase oils, used Glycerin, used Hydraulic oil, used synthetic oils, waste machine shop cutting oil, waste mineral spirits solvent, waste grades #1, #3, #4 heating oils, waste mixed heavy oil etc., as well as regular oils, such as diesel, etc.

2. Automatic ignition, workers-nursing unnecessary.

3. Flame adjustable freely by air-inlet controller easily; from the “Observing Window” operators can easily see changes of the flame.

4. All parts tested thousands of times and improved to be of good quality and reliable.5. All errors readable from the front panel, thus our used oil burner is just “Smart Burner”!

6. Complete fuel burning ensures very low emissions, reducing pollution as much as possible. Environmentally –friendly, Exhausting air complies with the requirements of EURO III;

7. Big oil tank optional, as big as 100L container for holding waste oil, pumping system is held at the top to pump waste oil into burner machine; At the same time hold the burner machine during shipping from damage;

8. There is heating instrument at the bottom of big oil tank to pre-heat fuel before pumping, esp. considerate for using in cold area.

9. Double safety design for PC program.

Applications of Used Oil Burner:

It is widely used in boilers, asphalt mixing plants, oil fields, incinerators, hot air furnaces, casting machines, industrial kilns and other thermal mechanical equipment

Used Oil Burner for Furnace

Our customers:

Used Oil Burner for Furnace

Used Oil Burner for Furnace

Used Oil Burner for Furnace

Our Services:

1.We help to choose the suitable boiler burner model according to the requirements of customer

2.Providing relative technical data, technical service and operation guidance for whole life long.

3.We keep 24 hours online and keep close contacts during the production process to ensure on time delivery with perfect finished product.

China best Used Oil Burner for Furnace. Welcome to contact us freely!

Jenny Guo:+86-15836160815 (whatsapp/wechat)

Hot Tags: used oil burner for furnace, manufacturers, suppliers, factory, made in China, professional, safety, good quality, best price

Inquiry

You Might Also Like