Gas generator sets are widely used in combustible gases such as natural gas, oil field mixed gas, coal gas, etc. Gas generator sets are new types of generator sets developed to meet the requirements of world environmental protection and the new market environment.
The working principle of the gas generator set is: the engine of the gas generator and the generator are coaxially connected and placed on the chassis of the whole machine, and then the muffler and governor of the gas generator are connected to the engine, and the gas source is passed into the engine. The gas channel is connected to the recoil starter with pull cord on the engine and the voltage regulator connected to the generator output. The combustible gas contained in the gas source of the gas generator is natural gas, or liquefied petroleum gas, or biogas.
Compared with gasoline generator sets and diesel generator sets, the use of gas generator sets reduces environmental pollution and is an environmentally friendly and energy-saving generator. Moreover, the structure is simple, the use is safe and reliable, and the output voltage, voltage and frequency are stable. The filter device is used to protect the valve of the gas pipeline, and the aperture of the filter should not be greater than 1.5mm. The gas pressure-stabilizing filter device is the main and key equipment of the gas transmission and distribution process. It mainly undertakes the functions of pressure regulation and stabilization, as well as one or more functions such as filtration, metering, odorization, and gas distribution.
The fluctuation of pressure at the outlet of the regulator valve should not exceed ±5% in the entire combustion adjustment range. If the air valve train is equipped with an independent regulator valve, the front end of the air inlet should be equipped with an independent filter device to avoid blocking the air pipe in the regulator valve.
Product Features(1) High thermal efficiency:
It can adapt to pressure fluctuations, adjust the primary air distribution by itself (that is, the gas pressure is high, and the primary air is drawn in; the gas pressure is low, and the primary air is drawn in less), the combustion is sufficient, and the thermal efficiency is high;
(2) High safety: The burner is equipped with a small fire. When the boiler starts, light a small fire first. When the small fire burns normally and steadily, the automatic control system will open the main gas valve, and the fuel can enter the boiler for normal combustion without deflagration;
(3) Strong fuel adaptability: This kind of burner can be applied to natural gas, liquefied petroleum gas, coal gas, liquefied petroleum gas mixture and other types of gas only by replacing a few parts.