waste rubber pyrolysis equipment Environmental pollution
Waste rubber pyrolysis equipment is an environmentally friendly non-polluting equipment can be used to deal with waste tires, the equipment can be used to convert waste tires through high temperature pyrolysis into fuel, carbon black, wire. Machinery and equipment production of waste rubber pyrolysis equipment attaches great importance to its own environmental protection system, mainly reflected in the four aspects:
First, the water treatment:
Part of the condenser water, without any pollution.
Another part of the dust is water, is circulating water, only evaporation, no emissions.
Second, the exhaust treatment:
1, is the feed when the feed port leak a very small amount of water vapor and a small amount of oil and gas, recovered by the oil hood by the second combustion into the dust collector,
2, the second is the coal dust from the fan to the dust collector to deal with the chimney discharge, to ensure that dust emissions to meet the relevant standards.
3, is the reactor out of the C4 below the normal temperature, atmospheric pressure can not be recycled by the igniter by the pipeline into the furnace by the gas gun burning, both energy saving and environmental protection. In the production process, the equipment is fully sealed state of operation, phosphating fluid without any smell.
Third, the waste treatment:
1, is discharged from the reactor residue, the high temperature non-toxic and tasteless, can be used for carbon black work can also be used for building materials.
2, is the remaining coal slag, can be used for building materials, both without any emissions.
Fourth, the noise treatment: equipment selection of low noise fan, noise less than 60 decibels, power with part of the noise and the feeder noise are not more than 50 dB.
First, the waste rubber pyrolysis equipment using the international top technology - zero stripping technology, and the traditional technology is different from the thermal cracking process does not require the use of special technology to wire and rubber for the second separation, this operation for reducing energy consumption Has a key role, thereby reducing capital investment, to a large extent enhance the economic efficiency of the rise.
Second, in order to effectively ensure that the gas is not spilled in the production process, improve the thermal cracking efficiency, thermal cracking using micro-negative pressure process technology, this advantage is to fundamentally eliminate the gas spill caused by the insecurity.
Third, the waste rubber pyrolysis equipment production process, the rubber after thermal cracking, most of the liquid into a small amount of flammable gas circulation as a pyrolysis furnace fuel use. Thus ensuring the pyrolysis furnace heat supply, reducing emissions, improve the economic and environmental benefits.