Pyrolysis Plant Knowledge

- Sep 18, 2018 -

FAQ Q: How you can clean the emission to meet environmental standard? A: 3 layers of dedusting system-alkali liquor wasing+ceramic filtering+alkali liquor sprayers. Extra gas from reactor will be recycled into furnace for heating, it will be cleaned by specific device before to be burned of cause. Ash and odor are also well prevented as the pyrolysis system is totally sealed, sepcially for continuous running plants. Q: Can tire and plastic be mixed to be processed? A: Generally, we don’t recommend you to mix them. Tire and plastic need different temperature and time to be processed. If you put them together, much fuel will be wasted. Besides, the quality and rate of final oil will also change. Q: What’s the difference between continuous pyrolysis plant and intermittent pyrolysis plant? A: They are different in the following aspects: For the continuous type, the feeding of raw materials and discharging of slag are both automatic. While for the intermittent type, these two processes are manual. For the continuous type, the feeding hole is very small, so the pretreating system is needed to cut the raw materials into small piece. While the intermittent type does not need this device. The continuous plant can operate for some time without stop. While for the intermittent plant, the reactor must be cooled before the second batch. Q: What’s the usage of the Pyrolysis oil? Can it be used in vehicles? A: (1) The pyrolysis oil is fuel oil and can be used as fuel in some heavy industry factories, such as glass factory, power plant factory, aluminum factory and so on. (2) If you want to use the oil in vehicles, you may need the distillation plant. It can distill the pyrolysis oil into diesel.